Desoldering Suction Pump – Handheld Electric Tin Suction Sucker Pen Desoldering Pump Welding Soldering Iron Tools(EU Plug)

Add your review

13,99

13,99

Add to wishlistAdded to wishlistRemoved from wishlist 0


Price: 13,99 €
(as of Nov 09,2020 08:56:14 UTC – Details)



Specification:
Material: stainless steel, plastic
Color: as pictures shown
Size: 270x28mm

Notes:
1. Check whether the voltage is consistent, too high or too low voltage is not conducive to use;
2. Before using, spin the cylinder and the suction nozzle tight to prevent leakage. Otherwise it will affect the suction.
3. Clear the solder impurities in the suction nozzle and the cylinder frequently, and add a little oil to the piston;
4. Everytime after using, push the piston 3-4 times to remove the residual straw for suction nozzle and straw’s next smooth use;
5. Suction tin device is strictly prohibited to install and remove part of its electric parts when powered on.
6. It’s normal that there is slightly smoke due to heating when the first time to use the new tin suction pump. It will naturally disappear after ten minutes.
7. When using, a natural cooling soldering iron base must be equipped and the suction pen should be placed in the iron base.
8. If the power cord is damaged, to avoid danger it must be replaced by the manufacturer or maintenance department or similar full-time personnel.
9. This product has a ground wire which should be used along with a socket with contacts. Please pay attention for safety.

Package included:
1* set electric solder sucker

Turn on the power, preheating for 3-5 minutes,push down the piston handle, point the tin suction nozzle at the soldering part; after tin has melted, press the control button, the solder is sucked into the cylinder.
Before using, spin the cylinder and the suction nozzle tight to prevent leakage. Otherwise it will affect the suction.Clear the solder impurities in the suction nozzle and the cylinder frequently, and add a little oil to the piston.
Everytime after using, push the piston 3-4 times to remove the residual straw for suction nozzle and straw’s next smooth use.Suction tin device is strictly prohibited to install and remove part of its electric parts when powered on.
When disassembling the cylinder, press down the top of the cylinder according to the direction of the arrow, pull the cylinder and the handle apart at the same time, and the cylinder can be separated out; when disassembling the suction nozzle, spin it counterclockwise and remove it.

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Desoldering Suction Pump – Handheld Electric Tin Suction Sucker Pen Desoldering Pump Welding Soldering Iron Tools(EU Plug)”

Your email address will not be published. Required fields are marked *

Desoldering Suction Pump – Handheld Electric Tin Suction Sucker Pen Desoldering Pump Welding Soldering Iron Tools(EU Plug)

13,99

F-Savings
Logo
Enable registration in settings - general